Styleline Wood Blinds
	How to Fit HOW TO INSTALL Step 1 Choose how to fix bracket Select the method of mounting that best suits your purpose. A. Inside mounting to the inside or between the sides of the window frame. B. Outside mounting to the face or outside the window frame C. Ceiling mounting to an overhead surface such as the top inside of window frame or the ceiling. A B C Step 2 Mark Bracket positions Measure where you want the blind to hang. Make sure that the blind is centered and level. When it is positioned properly, make a small pencil mark at each side of the blind to show where you attach the mounting brackets. Step 3 Attach first bracket Hold one bracket with the door section opening upwards at desired height and width you have chosen and mark the screw holes with a pencil.  Then insert and tighten screw through bracket slot. Use rawl plugs where necessary. Step 4 Attach second bracket level with first After the first bracket is mounted, carefully position and attach the second bracket. Double check to ensure it is level with the first bracket and that the brackets are the proper distance apart. Step 5 Hang blind Pick up the blind and slide the head rail into the brackets.  Make sure that the blind cord and the tilt cord or tilt wand mechanism faces toward you.  Close the front cap/door on each bracket. Brackets types The bracket types supplied will vary depending on the type and size of blind. Colonial brackets 25 mm brackets 50 mm brackets