How To Fit Wooden Venetian Blind
	Instructions Step 1 Brackets are packed into one end of the box. They are easy to miss so avoid throwing them out with the packaging. Choose to Top Fix or Face fix the brackets. FACE FIX .. to fit the bracket to the window frame. TOP FIX... to the lintel if the window frame is uPVC, or if there are any obstructions,like window handles etc. Step 2 Extend hinged door on each bracket as far as it will go. Identify left and right brackets from light L and R markings inside. Position the bracket and mark two holes according to type of fixing chosen. Step 3 Once the brackets are fitted, remove plastic end caps from blind headrail. Slide the blind into the brackets, with velcro patches facing towards you. Step 4 Push down and snap shut the hinge doors to lock the headrail into position. Step 5 Remove the thin plastic backing from both velcro patches, leaving adhesive surfaces. Position fascia on front and press firmly to adhere. If supplied, wooden returns will fit automatically into place at ends of headrail. Step 6 Use one set of cord controls to raise and lower the blind, pulling it to one side to lock into the desired position. Use the other cord controls to angle the louvres. Blind components 2 Matching end returns (if blind is to be fitted outside the window recess). 2 End brackets 1 Matching Valance 1 Center Support Bracket (If length of blind requires it) Screws Rawl plugs 1 main Blind component