How To Fit Vertical Blind
	Operating Instructions The side chain operates the angle of the louvres The cord opens and closes the blind Pull gently on either to create your desired effect Do not use the cord to open and close the blinds unless the louvres are in the fully open position If one of your louvres is out of alignment, pull the control chain until they are all closed and then pull the control chain until the louvres are in alignment. When aligning you will experience some resistance until the misaligned louvre is back in place From time to time the side chain connector can reach the headrail, preventing louvre rotation. Simply pull the control chain in the opposite direction until the connector is at the bottom of the loop A silicon-based furniture polish inside the headrail will ensure the louvres glide smoothly Cleaning Before removing the louvres from the headrail, unclip the chain at the bottom of the louvre and slide out the weights To unhook the louvres, hold the top of the louvre, tilt to 45 degrees and pull the clip out of the hook Remove the plastic hangers in the top of the louvre and lay the louvres separately on a flat surface. Side Warning In the interest of safety please keep all pull cords, chain/bead cords out of the reach of childern.