How to Fit Roman Blinds
	HOW TO INSTALL Step 1 Positioning of brackets Mark off the position of the brackets, keeping the brackets level accross the window. Ensure that the maximum distance between the brackets is 800mm i.e. 80cm. Ensure that the position choosen allows the blind to drop, clearing any obstruction such as windows handles etc. Ensure that the bracket positions will not interfere with the mechanisms in the blind headrail. Step 2 Brackets can be Face fixed or top Fixed Top Fixed Face Fixed Face Fixed Extension Step 3 Install the blind After the brackets are fitted securely, set the arm of the swivel bracket to the open position (note the brackets shown in step 2 are in the open position). Insert the headrail into the brackets and close the arm of the swivel bracket. Step 4 Attach fabric to headrail The fabric of the Roman blind is attached to the headrail with velcro. Step 5 Install Cleat ( Not required with sidewinder) Position the cleat near the bottom of the window. Fix the cleat to the frame or wall using screws. Use rawl plugs if neccessary. Pull side cords to open the blind and tie them to the cleat to keep the blind raised. Warning In the interest of safety please keep all pull cords, chain/bead cords out of the reach of childern.